Compliance with Occupational Health and Safety (OHS) regulations in industrial facilities is not just a legal requirement; it is a cornerstone of production continuity and employee safety. However, in a facility with hundreds of employees and complex on-site operations, manually monitoring the use of Personal Protective Equipment (PPE), hazardous area violations, and hard hat and safety vest compliance 24/7 is nearly impossible.
PPE requirements are clearly defined for everyone on the production floor. The real question is whether these rules are followed at 3:40 AM, behind Production Line B, when nobody is watching. An OHS specialist cannot be everywhere at once during a shift. Site inspections and checklists document what happens at the time of inspection, but not the hours in between. AI-powered video analytics aims to close this gap by leveraging the cameras already installed at your facility.
With its AI-powered image processing solutions, MonitEye helps automate OHS monitoring. But how ready is your facility for this transformation? Can you adopt AI using your existing cameras without overhauling your infrastructure?
Take the 1-Minute OHS Readiness Test below to assess your facility’s current situation and discover the benefits of AI-powered monitoring!
MonitEye OHS Module Readiness Test
5 questions, approximately 1 minute. Your answers will not be recorded.
Question 1
Does your facility have an existing IP camera or CCTV surveillance infrastructure?
A) Yes, we already have active IP cameras covering critical areas of our facility.
B) We have cameras in some areas, but they are older analog systems.
C) No, our facility does not yet have an advanced camera infrastructure.
💡 MonitEye Tip: If your answer is A, you’re already one step ahead! MonitEye can integrate directly with your existing IP cameras, helping you avoid costly new hardware investments. With a plug-and-play approach, your facility can begin AI-powered OHS monitoring without replacing its entire camera infrastructure.
Question 2
How is the use of hard hats, high-visibility vests, masks, and gloves monitored on the production floor?
A) Our OHS specialists or shift supervisors conduct manual inspections on-site.
B) We perform checks at entry points, but we cannot monitor compliance in real time across the work areas.
C) We review camera footage retrospectively, usually after an incident, to identify violations.
💡 MonitEye Tip: Manual inspections provide only a snapshot of conditions at a particular moment. MonitEye’s OHS Module continuously analyzes live camera feeds using AI. When a worker is detected without a hard hat or safety vest, the system can send real-time alerts to designated personnel within seconds.
Question 3
Do you experience restricted-area violations or forklift–pedestrian interaction risks?
A) Yes, pedestrians sometimes enter hazardous areas or forklift routes without authorization or due caution.
B) We have implemented physical barriers, but we cannot monitor violations in real time.
C) Our facility has no significant restricted-area violation risks.
💡 MonitEye Tip: With MonitEye, virtual boundaries (geofencing) can be defined within camera views. When a person enters a restricted area or approaches a moving vehicle within a defined risk zone, the system can generate an alert based on the configured rules.
Question 4
Can you generate data-driven reports and analyze trends following OHS violations?
A) We maintain reports manually in Excel, and compiling the data takes considerable time.
B) We cannot statistically identify which shifts or departments experience the most violations.
C) Yes, we have regular digital reporting systems in place.
💡 MonitEye Tip: The MonitEye dashboard presents visual reports showing when and where PPE violations occur most frequently, including by shift, facility, department, or time of day. These insights can help you focus on high-risk areas and organize targeted training instead of simply penalizing employees.
Question 5
What concerns you most when investing in a new technology?
A) Infrastructure upgrades, cabling, and installation processes that take weeks or months.
B) Employees struggling to learn and use complex software.
C) High hardware and licensing costs.
💡 MonitEye Tip: MonitEye is designed to leverage existing camera infrastructure where technically suitable, reducing the need for complex software deployments or entirely new hardware investments. Its flexible architecture can help streamline implementation while minimizing disruption to ongoing operations.
How Can AI-Powered Video Analytics Be Used in OHS Processes?
MonitEye analyzes existing camera footage from production facilities using AI-powered image processing to support the monitoring of predefined workplace safety scenarios.
Depending on the facility’s needs and the suitability of its camera footage, the following scenarios can be evaluated:
1. Personal Protective Equipment (PPE) Compliance
Monitoring the use of designated protective equipment, such as hard hats, high-visibility vests, gloves, masks, safety footwear, and protective eyewear, through video footage.
2. Restricted-Area Violations
Detecting unauthorized entry into designated hazardous zones and triggering alerts in accordance with predefined safety rules.
3. Forklift and Pedestrian Safety
Monitoring predefined proximity risks and potentially hazardous interactions in areas shared by forklifts and pedestrians.
4. Unsafe Work Behaviors
Monitoring behaviors such as mobile phone use, smoking, inappropriate conduct in designated work areas, and other risks that can be defined according to facility requirements.
5. Smoke and Fire Indicators
Supporting the early identification of potential smoke or fire indicators through suitable camera footage and configured detection scenarios.
These scenarios should not be assumed to perform with the same level of accuracy in every facility. Camera angles, lighting conditions, object occlusion, and working environments can affect results. Suitable scenarios should be identified through technical assessment and validation.
Can You Get Started with Your Existing Cameras?
An AI-powered video analytics project does not always require building a new camera infrastructure from scratch.
MonitEye can be evaluated for use with existing IP cameras that meet the relevant technical requirements. This approach can help facilities leverage their current investments and focus on the scenarios that matter most.
Three steps provide a practical starting point:
Assess your existing infrastructure: Check camera models, image quality, and network accessibility.
Identify your priority risk: Start with a measurable scenario, such as PPE non-compliance, restricted-area violations, or forklift–pedestrian interactions.
Evaluate technical suitability: Review camera footage, scenario requirements, and expected outcomes together.
This approach allows you to evaluate the investment around a specific operational need before committing to a broader facility-wide project.
Would You Like to Monitor Workplace Safety Risks More Effectively Through Your Existing Cameras?
Get in touch with us to learn more about MonitEye’s OHS solutions and evaluate the most suitable starting scenario for your facility.
Request a Meeting with MonitEye